Special UV absorbers for solvent based and water-soluble coatings (automotive coatings, industrial coatings, commercial coatings, etc.)

Jan 29, 2025 Leave a message

UV-1130 is a UV absorber used in the coating industry, which is easy to emulsify and particularly suitable for water-based systems. With high temperature resistance and extraction resistance, UV-1130 is capable of meeting the high requirements of automotive and industrial coatings. UV-1130 can also provide sufficient protection for sensitive materials such as wood.

 

  • Chemical composition: Benzotriazole mixture with an average molecular weight of 620
  • Absorption Pop: Maximum absorption wavelength in toluene solution at 346nm
  • Physical properties: light yellow to light amber viscous liquid
  • Viscosity properties below 20 ℃: 7300-8000mPa. s
  • Density below 20 ℃: 1.17g/cm3
  • Solubility: (grams dissolved per 100ml solvent at 25 ℃)
  • Butyl carbitol:>50
  • Butyl acetate:>50
  • Xylene:>50
  • 1-Methoxy-2-propyl acetate:>50
  • MEK : ﹥50
  • Water:<0.1


UV-1130 is a hydroxyphenylbenzotriazole based UV absorber that can effectively protect the gloss of coatings, prevent cracking and spot formation, and is particularly suitable for water-based systems.

The dispersion of UV absorber UV-1130 in aqueous systems can be obtained by dissolving it in water-soluble solvents such as diethylene glycol diethyl ether.

The UV absorber UV-1130 is shared with hindered amines (HALS), such as light stabilizers 292 or 123. These shared synergists can significantly improve coating performance, preventing loss of gloss, cracking, foaming, peeling, and discoloration.
Storage conditions: It should be placed in a dark, well ventilated place, kept dry, and not directly exposed to sunlight.

 

Extensive experiments have shown that UV-1130 can be used in solvent based and water-soluble coatings
Automotive Coatings
Industrial Coatings
Commercial sales of coatings

 

If UV-1130 is combined with the hindered amine light stabilizer UV-292, the weather resistance of the coating will be significantly improved, and the synergistic effect will make the automotive coating work better. It has a good inhibitory effect on the reduction of gloss, cracks, bubbles, delamination, and color.

 

Suggested dosage:
1%-3%TINUVIN 1130
Additionally, 0.5-2% TINUVIN 292 can be added

info-800-800